ag赌博

1. Gismelseed, Sarra, Amur Al-Yahmedi, and Riadh Zaier. "A biped model to predict a wide range of gait and posture results." Franklin Open 3 (2023): 100020.
2. Gismelseed, Sarra, Amur Al-Yahmedi, Riadh Zaier, Hassen Ouakad, and Issam Bahadur. "Predicting Sit-to-Stand Body Adaptation Using a Simple Model." Axioms 12, no. 6 (2023): 559.
3. Nassar, Mahmoud MA, Khalid I. Alzebdeh, Nasr Al-Hinai, and Tasneem Pervez. "A new multistep chemical treatment method for high performance natural fibers extraction." Journal of Natural Fibers 20, no. 1 (2023): 2150922.
4. Summad, Emad, Mahmood Al-Kindi, Nasr Al-Hinai, Ahm Shamsuzzoha, and Sujan Piya. "The application of agent-based modelling for the diffusion of innovation research: a case study." International Journal of Business Innovation and Research 30, no. 4 (2023): 542-564.
5. Zarog, Musaab. "Application of fuzzy logic in evaluating the authenticity of hadith and narrators." International Journal of Reasoning-based Intelligent Systems 15, no. 2 (2023): 156-164.
6. Zarog, Musaab. "Energy Harvesting from Ambient Vibration at Low Force/Acceleration Input." Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) 16, no. 3 (2023): 287-292.
7. Zarog, Musaab, “Improving Economic Research Impact in Low-income Countries: Key Challenges and the Way Forward.” Indian Journal of Economics and Development, 19, no 1 (2023): 216-223.
8.  
9. Abid, Nesrine, Ahmed C. Ammari, Ahmed Al Maashri, Mohamed Abid, and Medhat Awadalla. "Accelerated and optimized covariance descriptor for pedestrian detection in self-driving cars." Design Automation for Embedded Systems 27, no. 3 (2023): 139-163.
10. Ahmad, Afaq, M. Abdul Kareem, Ahmed Al Maashri, Medhat Awadallah, Sayyid Samir Al Busaidi, and Maram Ahmed Al Khuzaimi. "Online Failure Detection using Deep Learning in FPGA PCB Interface." International Journal of Advanced Natural Sciences and Engineering Researches (IJANSER) 7, no. 6 (2023): 21.
11. Ahmad, Afaq, Sabir Hussain, M. A. Raheem, Ahmed Al Maashri, Sayyid Samir Al Busaidi, and Medhat Awadallah. "ASIC vs FPGA based Implementations of Built-In Self-Test." International Journal of Advanced Natural Sciences and Engineering Researches (IJANSER) 7, no. 6 (2023): 14.
12. Ahmad, Israr, Muhammad Shafiq, and Bashir Naderi. "Finite-time synchronization of four-dimensional memristor-based chaotic oscillator and applied to secure communication systems." Franklin Open 3 (2023): 100015.
13. Al Maawali, Waleed, Mostefa Mesbah, Ahmed Al Maashri, and Ashraf Saleem. "Design of intelligent thruster decision-making system for USVs." Ocean Engineering 285 (2023): 115431.
14. Aldaoud, Manar, Dawood Al-Abri, Ahmed Al Maashri, and Firdous Kausar. "Detecting and mitigating DHCP attacks in OpenFlow-based SDN networks: a comprehensive approach." Journal of Computer Virology and Hacking Techniques 19, no. 4 (2023): 597-614.
15. Bait-Suwailam, Mohammed, Joseph Jervase, Hassan Al-Lawati, and Zia Nadir. "An Active Learning Computer-Based Teaching Tool for Enhancing Students’ Learning and Visualization Skills in Electromagnetics." International Journal of Electronics and Telecommunications 69, no. 1 (2023).
16. El-Shahat, Mohammed, Ibrahim Al-Naimi, and Elsayed Tag-Eldin. "Risk Probabilistic Characteristics for Contaminated Porcelain Insulator in the Egyptian Sinai Desert." Journal of Electrical and Computer Engineering 2023, ID: 6662939.
17. Ghaeb, Jasim, Ibrahim Al-Naimi, and Malek Alkayyali. "Intelligent Integrated Approach for Voltage Balancing Using Particle Swarm Optimization and Predictive Models." Journal of Electrical and Computer Engineering 2023. ID: 261990066.
18. Mesbah, Mostefa, Muhammad Shafiq, Ashraf Saleem, Hassan Yousef, and Hisham Soliman. "A data-driven controller for position tracking of a long-stroke piezoelectric actuator." Microsystem Technologies 29, no. 2 (2023): 211-221.
19. Shafiq, Muhammad, and Israr Ahmad. "Synchronization of chaotic satellite systems with an unknown parameter." Journal of Vibration and Control (2023): 10775463231203276.
20. Shafiq, Muhammad, Israr Ahmad, and Bashir Naderi. "Synchronization of chaotic RCL Shunted-Josephson junction systems with unknown parametric uncertainties: Applications to secure communication systems." IEEE Access (2023).

1. Nassar, M.M., Abu Tarboush, B.J., Alzebdeh, K.I., Al-Hinai, N., and Pervez, T., 2022. New Synthesis Routes toward Improvement of Natural Filler/Synthetic Polymer Interfacial Crosslinking. Polymers, 14(3), 629.
2. Piya, S., Shamsuzzoha, A., Azizuddin, M., Al-Hinai, N., and Erdebilli, B., 2022. Integrated Fuzzy AHP-TOPSIS Method to Analyze Green Management Practice in Hospitality Industry in the Sultanate of Oman. Sustainability, 14(3), 1118.
3. Shadoul, M., Yousef, H., Al Abri, R., and Al-Hinai, A., 2021, April. Adaptive fuzzy control of three-phase grid-connected inverter. In 2021 12th International Renewable Engineering Conference (IREC) (pp. 1-6). IEEE.
4. Elhaffar, A., Tarhuni, N., and Al-Hinai, A., 2022, March. Micro-grid educational laboratory modernization using IEDs. In 2022 IEEE Global Engineering Education Conference (EDUCON) (pp. 1443-1447). IEEE.
5. Al Abri, W., Al Abri, R., Yousef, H., and Al-Hinai, A., 2022, June. A Global MPPT Based on Bald Eagle Search Technique for PV System Operating under Partial Shading Conditions. In 2022 10th International Conference on Smart Grid (icSmartGrid) (pp. 325-332). IEEE.
6. Ammari, A.C., Labidi, W., Aldaoud, M., Mnif, F., Yuan, H., Zhou, M., and Sarrab, M., 2022, August. Scheduling of Cloud Computing Tasks via Intelligent Optimization Methods. In Proceedings of Seventh International Congress on Information and Communication Technology: ICICT 2022, London, Volume 4 (pp. 209-221). Singapore: Springer Nature Singapore.
7. Bait-Suwailam, M.M., Jervase, J., Al-Lawati, H., and Nadir, Z., 2022, March. Enhancing Students’ Critical Thinking and Visualization Skills of Three-Dimensional Problems in Electromagnetics. In 2022 IEEE Global Engineering Education Conference (EDUCON) (pp. 586-589). IEEE.
8. Mohammadzaheri, M., Ziaiefar, H., Ghodsi, M., Emadi, M., Zarog, M., Soltani, P., and Bahadur, I., 2022. Adaptive Charge Estimation of Piezoelectric Actuators with a Variable Sensing Resistor, an Artificial Intelligence Approach. Engineering Letters, 30(1).
9. Al-Naimi, I., and Baniyounis, M., 2022, May. Indoor Human Identification Using Advanced Machine-Learning-Based Strategy. In 2022 19th International Multi-Conference on Systems, Signals & Devices (SSD) (pp. 1924-1928). IEEE.
10. Al Shereiqi, A., Al-Hinai, A., Mohandes, B., Al-Abri, R., and Albadi, M., 2022, July. Wind Farm Layout Optimization in Different Search Spaces: A Case Study in Oman. In 2022 IEEE Power & Energy Society General Meeting (PESGM) (pp. 1-5). IEEE.
11. Ouakad, H. and Bahadur, I.B., 2022. Non-Invasive Method for Early Detection of Heart Failure from MEMS Based Biomedical Sensors. Technical Final Report submitted to the College of Engineering for Internal Grant, Project No: CL/ag赌博-QU/ENG/20/01, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Sultanate of Oman.
12. Mohammadzaheri, M., Sakar, M., and Bahari, H., 2022. Towards Enhanced Autonomous Robots by Combining Sliding Mode and Lyapunov Controllers: An Industrial Application. Technical Progress Report submitted to Research Deanship, Project No: IG/ENG/MIED/22/02, Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Sultanate of Oman.
13. Al-Riyami, M., Bahadur, I. and Ouakad, H., 2022. There is Plenty of Room inside a Bluff Body: A Hybrid Piezoelectric and Electromagnetic Wind Energy Harvester. Energies, 15(16): 6097.
14. Bahadur, I., 2022. Dynamic Modeling and Investigation of a Tunable Vortex Bladeless Wind Turbine Energies, 15(18): 6773.
15. Kallingal, N., Maurya, M.R., Sajna, M.S., Yalcin, H.C., Ouakad, H.M., Bahadur, I., Al-Maadeed, S. and Sadasivuni, K.K., 2022. A Highly Sensitive Wearable Pressure Sensor Capsule Based on PVA/Mxene Composite Gel. 3 Biotech, 12(8): 171.
16. Ouakad, H.M., Al-Harthi, M. and Bahadur, I.B., 2022. On the Use of Nonlinear Impact Oscillators in Vibrating Electromagnetic Based Energy Harvesters. Journal of Intelligent Material Systems and Structures, 33(13): 1654-1662.
17. Ghodsi, M., Mohammadzaheri, M., Soltani, P. and Ziaifar, H., 2022. A New Active Anti-Vibration System Using a Magnetostrictive Bimetal Actuator. Journal of Magnetism and Magnetic Materials, 557: 169463
18. Vakili-Nezhaad, G.R., Mohammadzaheri, M., Mohammadi, F. and Humaid, M., 2022. Density and Refractive Index of Binary Ionic Liquid Mixtures with Common Cations/Anions, along with ANFIS Modelling. Liquids, 2(4):432-444.

1. Fradi, M., Khriji, L., Machhout, M., Hossen, A., 2021. Automatic Heart Disease Class Detection using Convolutional Neural Network Architecture鈥恇ased Various Optimizers鈥怤etworks. IET Smart Cities, 3(1): 3-15.
2. Ghommam, J., Saad, M., Mnif, F., 2021. Finite-Time Circular Formation around a Moving Target With Multiple Underactuated ODIN Vehicles. Mathematics and Computers in Simulation, 180: 230-250.
3. Haris, M., Shafiq, M., Ibrahim, A., and Misiran, M., 2021. Nonlinear Feedback Controller for the Synchronization of Hyper (Chaotic) Systems with Known Parameters. ISRP Journal of Mathematics and Computer Science, 23(2): 124-135.
4. Haris, M., Shafiq, M., Israr Adyda, A. I., and Misiran, M., 2021. A Nonlinear Adaptive Controller for the Synchronization of Unknown Identical Chaotic Systems. Arabian Journal for Science and Engineering, 46: 10097–10112.
5. Israr A., and Shafiq, M., 2021. Synchronization Control of Externally Disturbed Chaotic Spacecraft in Pre-Assigned Settling Time. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 236(1): 87-106.
6. Israr, A., Adel, O., Shafiq, M., Viet-Thanh, P., and Dumitru, B., 2021. Finite-Time Stabilization of a Perturbed Chaotic Finance Model. Journal of Advanced Research, 32: 1-14.
7. Jellali, S., Charabi, Y., Usman, M., Al-Badi, A., Mejdi, J., 2021. Investigations On Biogas Recovery from Anaerobic Digestion of Raw and Mixed Sludge With Agri-Food Wastes: Application to the Largest Industrial Estate in Oman. Sustainability, 13(7): 1-20.
8. Lazhar Khriji
9. Masud, M., Al Kharusi, M.S.M., Ali, M.U., Mubashar, A., Hussain, S.J., Tariq, A., Rehman, G.U., Akhtar, M.H., Javeed, S. Prediction of the Ultimate Strength of Notched and Unnotched IM7/977-3 Laminated Composites Using a Micromechanics Approach. Polymers. 13(20), 3491 (2021).
10. Nadir, Z., Lawati, H., 2020. Propagation Measurements and Pertinency of Models for Communications Systems in Oman. American Journal of Science & Engineering (AJSE.US), 4(1): 16-21.
11. Nassar, M.M.A., Alzebdeh, K.I., Pervez, T., Al-Hinai, N., Munam, A. Progress and Challenges in Sustainability, Compatibility, and Production of Eco-Composites: A State-of-Art Review. Journal of Applied Polymer Science. 138(43), 51284 (2021).
12. Nassar, M.M.A., Alzebdeh, K.I., Pervez, T., Al鈥慔inai, N., Munam, A., Al鈥慗ahwari, F., Sider, I. Polymer Powder and Pellets Comparative Performances as Bio-Based Composites. Iranian Polymer Journal. 30, 269–283 (2021).
13. Saleem A., Mostefa M., and Shafiq M., 2021. Feedback–Feedforward Control for High-Speed Trajectory Tracking of an Amplified Piezoelectric Actuator. IOP Smart Materials and Structures, 30(1): 1-20.
14. Saleem A., Mostefa M., and Shafiq M., 2021. Feedback–Feedforward Control for High-Speed Trajectory Tracking of an Amplified Piezoelectric Actuator. IOP Smart Materials and Structures, 30(1): 1-20.
15. Usman, M., Farooq, M., Jellali, S., Farooq, M., Charabi, Y., Al-Sadi, A. M., and Al-Badi, A., 2021. COVID-19: The Challenges and Opportunities for Water, Air, Agriculture and Energy Sectors. International Journal of Agriculture & Biology, 25(5): 1085-1095.
16. Vakilian, S., Alam, K., Al-Kindi, J., Jamshidi-Adegani, F., Rehman, N.U., Tavakoli, R., Al-Riyami, K., Hasan, A., Zadjali, F., Csuk, R., Al-Harrasi, A., Al-Hashmi, S. An Engineered Microfluidic Blood-Brain Barrier Model to Evaluate the Anti-Metastatic Activity of β-boswellic Acid. Biotechnology Journal. 16(10), e2100044 (2021).
17. Vakilian, S., Fatemeh, J-a., Al Yahmadi, A., Al-Broumi, M., Rehman, N.U., Anwar, M.U., Alam, K., Al-Wahaibi, N., Shalaby, A., Alyaqoobi, S., Al-Harrasi, A., Mustafa, K., Al-Hashmi, S. A Competitive Nature-Derived Multilayered Scaffold Based on Chitosan and Alginate, for Full-Thickness Wound Healing. Carbohydrate Polymers. 262, 117921 (2021).
18. Zarog, M. Piezoelectric Ceramic for Energy Harvesting from Ambient Vibration. Energetika. 67(1-2), 62–68 (2021).

1. Abdullah Al-Shabibi: Fareh, R., Al-Shabi, M., Bettayeb, M., Ghommam, J., 2020. Robust Active Disturbance Rejection Control for Flexible Link Manipulator. Robotica, 38(1): 118-135.
2. Al Alam, K., Iqbal M., Hasan A., and Al-Maskari N. 2020. Rheological Characterization of Biological Hydrogels in Aqueous State. Journal of Applied Biotechnology Reports, 7, 172-176.
3. Al-Badi, A., and Al-Shabibi, A. 2020. Development of Energy Management System for Off-Grid Communities. Renewable and Sustainable Energy Reviews, 16(4), 282-295.
4. Al-Badi, M., Al-Badi, A., Ghorbani, R., Al-Hinai, A., Al-Abri, R. 2020. Enhancing Electricity Supply Mix in Oman with Energy Storage Systems: A Case Study. International Journal of Sustainable Engineering, 13: 1-10.
5. Al-Lawati, H., Al-Maashari, A., Al-Mansoori, M.H., and Abdulghani, A. 2020. Working in a Switched Framework of ABET Criteria 3 (a-k) Student Outcomes into the Changed (1-7) Student Outcome. SSRN Electronic Journal, 5: 1-6.
6. Al-Maskari, N., Iqbal, M., and Al-Badi, A. 2020. Energy Efficiency Measures for Rural Omani Buildings. Energy Efficiency, 13(3), 459-474.
7. Al-Shabibi, A., Al-Hinai, N., and Al-Lawati, H. 2020. Design and Economic Analysis of a Hybrid Solar-Wind System for Rural Electrification in Oman. Energy Conversion and Management, 193, 68-79.
8. Al-Yahmadi, A., Al-Badi, M., Al-Hinai, N., and Triki, C. 2020. Optimal Sizing of Hybrid Renewable Energy Systems for Rural Oman Communities. Energy Reports, 6, 839-849.
9. Awadalla, M., Khriji, L., Ammari, A. C., Al Raisi, A. 2020. Soft Computing Techniques for Facial Expression Recognition. Journal of Critical Reviews (JCR), 7(19): 8599-8610.
10. Bahadur, I., Al-Badi, A., Saleh, S. A., and Shamsuzzoha, A. 2020. Performance Assessment of Energy Storage Systems for Grid-Connected Microgrids. IEEE Access, 8, 25012-25023.
11. Eldirdiry O., Zaier R., Al-Yahmedi A., Bahadur I., AlNajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98, 101972.
12. Eldirdiry O., Zaier R., Al-Yahmedi A., Bahadur I., AlNajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98, 101972.
13. Eldirdiry O., Zaier R., Al-Yahmedi A., Bahadur I., AlNajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98, 101972.
14. Eldirdiry O., Zaier R., Yahmedi A., Bahadur I., Alnajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98.
15. Eldirdiry O., Zaier R., Yahmedi A., Bahadur I., Alnajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98.
16. Eldirdiry O., Zaier R., Yahmedi A., Bahadur I., Alnajjar F., 2020. Modeling of a Biped Robot for Investigating Foot Drop Using MATLAB/Simulink. Simulation Modelling Practice and Theory, 98.
17. Eshag M.A., Zarog M., 2020. Sizing Electrode and Its Effect on Performance of a Microactuator. Nanomaterials Science & Engineering, 2(1).
18. Ghommam, J., Luque-Vega, L.F., Saad, M., 2020. Distance-based Formation Control for Quadrotors with Collision Avoidance via Lyapunov Barrier Functions. International Journal of Aerospace Engineering, 2020: 1-17.
19. Heydarpour Y, Mohammadzaheri M., Ghodsi M., Soltani P., AlJahwari F., Bahadur I. and Al-Amri B. 2020. Application of the Hybrid DQ-Heaviside-NURBS Method for Dynamic Analysis of FG-GPLRC Cylindrical Shells Subjected to Impulse Load. Thin-Walled Structures, 155, 106-914.
20. Husain, A., Zunaid, M., Al-Brashdi, M., AL-Maqbali, F., Al-Jabri, E., Al-Mahrizi, A., 2020. Computational Investigation of Solar Updraft Tower for Power Generation in Sultanate of Oman. Indian Journal of Engineering and Materials Sciences, 27(4), 837-843.
21. Husain, A., Zunaid, M., Al-Brashdi, M., AL-Maqbali, F., Al-Jabri, E., Al-Mahrizi, A., 2020. Computational Investigation of Solar Updraft Tower for Power Generation in Sultanate of Oman. Indian Journal of Engineering and Materials Sciences, 27(4), 837-843.
22. Husain, A., Zunaid, M., Al-Brashdi, M., AL-Maqbali, F., Al-Jabri, E., Al-Mahrizi, A., 2020. Computational Investigation of Solar Updraft Tower for Power Generation in Sultanate of Oman. Indian Journal of Engineering and Materials Sciences, 27(4), 837-843.
23. Israr, A., Shafiq, M., 2020. A Generalized Analytical Approach for the Synchronization of Multiple Chaotic Systems in the Finite Time. Arabian Journal for Science and Engineering, 45: 2297–2315.
24. Israr, A., Shafiq, M., 2020. Oscillation Free Robust Adaptive Synchronization of Chaotic Systems with Parametric Uncertainties. Transactions of the Institute of Measurement and Control, 42(11): 1977–1996.
25. Israr, A., Shafiq, M., 2020. Robust Adaptive Anti-Synchronization Control of Multiple Uncertain Chaotic Systems of Different Orders. Automatika, 61(3): 396-414.
26. Khriji, L., Ammari, A.C., Awadalla, M., 2020. Hardware/Software Co-Design of a Vision System for Automatic Classification of Date Fruits. International Journal of Embedded and Real-Time Communication Systems (IJERTCS), 11(4): 050120-082715.
27. Khriji, L., Awadalla, M., Al-Busaidi, A., 2020. Low-Power E-Health Systems Using Modified Data Compression Technique. Journal of Critical Reviews (JCR), 7(19): 8589-8598.
28. Khriji, L., Awadalla, M., Ammari, A. C., Al Raisi, A. 2020. Soft Computing Techniques for Facial Expression Recognition. Journal of Critical Reviews (JCR), 7(19): 8599-8610.
29. Khriji, L., Awadalla, M., and Al-Busaidi, A., 2020. Low-Power E-Health Systems Using Modified Data Compression Technique. Journal of Critical Reviews, 7: 8589-8598.
30. Lazhar Khriji: Khriji, L., Ammari A.C., Awadalla M., Al-Abri, S., 2020. Artificial Intelligent Techniques for Palm Date Varieties Classification. International Journal of Advanced Computer Science and Applications (IJACSA), 11(9): 489-495.
31. Mahmoud, I. M., Haithem, Y. A., Shafiq, M., Suwailem, M., 2020. Magnetically Coupled Electrical Machines for Renewable Energy Applications. International Review of Electrical Engineering, IREE, 15(4): 272-282.
32. Mnif, F., Boudriga, N., and Ben Othman, J. 2020. A New Solution for Secure Energy Management in Smart Grids. Journal of Electrical Engineering & Technology, 15(2), 325-336.
33. Mohammed, N., and Albadi, M., 2020. Demand Response in Electricity Generation Planning. The Electricity Journal, 33 (7): 1-9.
34. Shafiq, M., Israr, A., Ambusaidi, M., Bashir, N., 2020. Robust Adaptive Multi-Switching Synchronization of Multiple Different Orders Unknown Chaotic Systems. Journal of Systems Science and Complexity, 33(15): 1330-1359.
35. Soliman, H.M., Saleem, A., 2020. Ellipsoidal Design of Robust Tracking Controller for Large-stroke Piezoelectric Actuators. Smart Materials and Structures, 29(7): 1-10.
36. Zaier, R., Boudriga, N., and Al-Riyami, M. 2020. Smart Grid Security: A Novel Approach for Detecting and Mitigating Attacks. Computers & Security, 88, 101654.
37. Zarog, M., and Al-Hinai, A. 2020. Power Control Strategies for Smart Microgrids with Hybrid Energy Storage Systems. International Journal of Energy Research, 44(6), 4678-4693

1. Acharya, S., El-Moursi, M., Al-Hinai, A., Al-Sumaiti, S., and Zeineldin, H., 2019. A Control Strategy for Voltage Unbalance Mitigation in an Islanded Microgrid Considering Demand Side Management Capability. IEEE Transactions on Smart Grid, 10(3), 2558-2568.
2. Alam, K., Al-Ghaithi, A., Piya, S., and Ashraf, S., 2019. In-vitro Experimental Study on the Histopathology of Bone in Ultrasonically Assisted Drilling. Medical Engineering and Physics, 67, 78-87.
3. Alam, K., Al-Ghaithi, A., Piya, S., and Saleem, A., 2019. In-Vitro Experimental Study of Histopathology of Bone in Vibrational Drilling. Medical Engineering & Physics, 67, 78-87.
4. Al-Badi, A., and Al-Mubarak, I., 2019. Growing Energy Demand in GCC Countries. Arab Journal of Basic and Applied Sciences, 26(1), 488-496.
5. Al-Badi, M., 2019. Solar PV Power Intermittency and its Impacts in Power Systems – An Overview. The Journal of Engineering Research, 16(2), 142-150.
6. Al-Maskari, N., McAdams, D. A., and Reddy, J. N., 2019. Modeling of a Biological Material Nacre: Multi-Objective Optimization Model. Mechanics of Advanced Materials and Structures, 1, 43841.
7. Eshag, M. A., and Zarog, M., 2019. The Effect of the Electrode Position on the Dynamic Behavior of an Electrostatically Actuated Microcantilever. Acta Universitatis Sapientiae, Electrical and Mechanical Engineering, 11, 34−41.
8. Ghodsi, M., Ziaiefar, H., Mohammadzaheri, M., and Al-Yahmadi, A., 2019. Modeling and Characterization of Permendur Cantilever Beam for Energy Harvesting. Energy, 176, 561-569.
9. Ghodsi, M., Ziaiefar, H., Mohammadzaheri, M., Omar, F. and Bahadur, I., 2019. Dynamic Analysis and Performance Optimization of Permendur Cantilevered Energy Harvester. Smart Structures and Systems, 23(5), 421-428.
10. Hassan, A., Hamdy, M., Ashraf, S., Kyrillo, N., Mustafa, M., and Shafiq, M., 2019. Enhanced Adaptive Control for a Benchmark Piezoelectric鈥怉ctuated System via Fuzzy Approximation. International Journal of Adaptive Control and Signal Processing, 33, 1329-1343.
11. Kammoun, Y., Ghommam, J., Boukhnifer, M., and Mnif, F., 2019. Two Current Sensor Fault Detection and Isolation Schemes for Induction Motor Drives Using Algebraic Estimation Approach. Mathematics and Computers in Simulation, 157, 39-62.
12. Mohammadzaheri, M., Emadi, M., Ghodsi, M., Jamshidi, E., Bahadur, I., Saleem, A., and Zarog, M., 2019. A Variable-Resistance Digital Charge Estimator for Piezoelectric Actuators: An Alternative to Maximize Accuracy and Curb Voltage Drop. Journal of Intelligent Material Systems and Structures, 30, 1699–1705.
13. Mohammadzaheri, M., Emadi, M., Ghodsi, M., Jamshidi, E., Bahadur, I., Saleem, A., and Zarog, M., 2019. A Variable-Resistance Digital Charge Estimator for Piezoelectric Actuators; an Alternative to Maximise Accuracy and Curb Voltage Drop. Intelligent Material Systems and Structures, 30(11), 1699-1705.
14. Osman, S. E., and Zarog, M., 2019. Optimized V-shaped Beam Micro-Electrothermal Actuator Using Particle Swarm Optimization (PSO) Technique. Micro and Nanosystems, 11, 62-67.
15. Saleem, A., Al Maashri, A., A. Al-Rahbi, M., Awadalla, M., and Bourdoucen, H., 2019. Cooperative Cruise Controller for Homogeneous and Heterogeneous Vehicle Platoon System. International Journal of Automotive Technology Springer, 20(6), 1131–1143.
16. Sayari, M., Zaier, R., and Masmoudi, N., 2019. Perfect Tracking of ZMP Trajectory for Humanoid Locomotion Using Repetitive Control. Journal of Mechanical Science and Technology, 33, 6037–6043.
17. Yousef, H., Hamdy, M., Saleem, A., Nashed, K., Mesbah, M., and Shafiq, M., 2019. Enhanced L1 Adaptive Control for a Benchmark Piezoelectric-Actuated System via Fuzzy Approximation. International Journal of Adaptive Control and Signal Processing, 33, 1329–1343.
18. Zarog, M., 2019. In Achieving the Most of Limited Research Budget for Engineering Research Projects: A Case Study at ag赌博. The Journal of Engineering Research (TJER), 16(2), 96-102.

1. Abdullah, O.I., Schlattmann, J., Senatore, A. and Al-Shabibi, A.M. 2018.  Investigation of Thermoelastic Problem of Multiple-Disc Friction Clutches Applying Different Thermal Loads, Heat and Mass Transfer, 54(11):3461-3471.
2. Abdul-Wahab, S., Fadlallah, S. and Al-Rashdi, M. 2018. Evaluation of the Impact of Ground-Level Concentrations of SO2, NOx, CO, and PM10 Emitted from a Steel Melting Plant on Muscat, Oman. Sustainable Cities and Society, 38:675-683.
3. Ahmad, I., Shafiq, M. and Al-Sawalha, M. 2018. Globally Exponential Multi Switching-Combination Synchronization Control of Chaotic Systems for Secure Communications. Chinese Journal of Physics, 56 (3):974-987.
4. Ahmad, I., Shafiq, M. and Shahzad, M. 2018. Global Finite-Time Multi-Switching Synchronization of Externally Perturbed Chaotic Oscillators. Circuits, Systems, and Signal Processing, 37(12):5253–5278.
5. Al-Abri, Z., Al Maashri, A., Al-Abri, D. and Bait Shiginah, F. 2018. Using SDN as a Technology Enabler for Distance Learning Applications. Indonesian Journal of Electrical Engineering and Informatics, 6(2):225-234.
6. Alam, K., Ghodsi, M., Al-Shabibi, A. and Silberschmidt, V.V. 2018. Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling. Journal of Medical and Biological Engineering, 38:236-243.
7. Alam, K., Imran, H., AL-Shabibi., A., Ghodsi, M. and Silberschmidt V.V. 2018. Experimental Study on the Effect of Drill Quality on Bone Temperature in Drilling. Biomedical Engineering: Applications, Basis and Communications (BME), 30:1850018-1850026.
8. Al-Maskari, N.S., McAdams, D.A., and Reddy J.N. 2018, Modeling of a Biological Material Nacre: Waviness Toughness Model. Mechanics of Advanced Materials and Structures, 30:1-7.
9. Mohammadzaheri, M., Ghodsi, M. and Al-Qallaf, A. 2018. Estimate of the Head Produced by Electrical Submersible Pumps on Gaseous Petroleum Fluids, a Radial Basis Function Network Approach. International Journal of Artificial Intelligence and Applications, 9(1):53-62.
10. Mohanan, N., Ahmad, A., Al-Busaidi, S., Khiriji, L., Abdulghani, A. and Al Nadabi, N. 2018. Use of Mathematical Morphology in Vehicle Plate Detection. Oriental Journal of Computer Science and Technology, 11(4):1-6.
11. Saleem, A., Soliman, H., Al-Ratrout, S. and Masoud, M.I. 2018. Robust Speed Control Design for Electric Motors Using the Kharitonov Theorem and Genetic Algorithms: An Experimental Study. International Journal of Modelling Identification and Control, 30(3):239-251.
12. Saleem, A., Soliman, H., Al-Ratrout, S. and Mesbah, M. 2018. Design of Fractional Order PID Controller with Application to Induction Motor Drive. Turkish Journal of Electrical Engineering and Computer Science, 26:2768-2778.
13. Shafiq, M., Laxman, K. and Dutta, J. 2018. Estimation of Ion Adsorption Using Iterative Analytical Model in Capacitive Deionization Process. Desalination and Water Treatment, 116:75-82
14. Shafiq, M., Saleem, A. and Mesbah, M. 2018. Model-Free Data Driven Control for Trajectory Tracking of an Amplified Piezoelectric Actuator. Sensors and Actuators A: Physical, 279:27-35.
15. Soliman, H.M., Saleem, A., Tutunji, T.A. and Al-Ratrout, S. 2018. Robust Pole-Placer for Electric Drives based on Uncertain Diophantine Equation and Interval Mathematics Using Hardware-in-the-Loop. Transactions of the Institute of Measurement and Control, 40(8):2546-2559.
16. Tutunji, T. and Saleem, A. 2018. Weighted Parametric Model Identification of Induction Motors with Variable Loads Using FNN Structure and NN2TF Algorithm. Transactions of the Institute of Measurement and Control, 40(5):1645-1658.

1. Abdo, J., Hassan, E., Al-Shabibia, A. and Kwak, J. 2017. Design of a Testing Facility for Investigation of Drill Pipes Fatigue Failure. The Journal of Engineering Research, 14(2):1-10.
2. Ahmad, I., Shafiq, M. and Al-Sawalha, M. 2018. Globally Exponential Multi Switching-Combination Synchronization Control of Chaotic Systems for Secure Communications. Chinese Journal of Physics, 56 (3):974-987.
3. Ahmad, I., Shafiq, M. and Shahzad, M. 2018. Global Finite-Time Multi-Switching Synchronization of Externally Perturbed Chaotic Oscillators. Circuits, Systems, and Signal Processing, 37(12):5253–5278.
4. Al-Abri, Z., Al Maashri, A., Al-Abri, D. and Bait Shiginah, F. 2018. Using SDN as a Technology Enabler for Distance Learning Applications. Indonesian Journal of Electrical Engineering and Informatics, 6(2):225-234.
5. Alam, K., Muhammad, R., Shamsuzzoha, A., Al-Yahmedi, A. and Ahmed, N. 2017. Quantitative Analysis of Force And Torque in Bone Drilling. The Journal of Engineering Research, 14(1):39-48.
6. Al-Maskari, N.S. McAdams, D.A. and Reddy, J.N. 2017. Modeling of a Biological Material Nacre: Waviness  Stiffness  Model.  Materials  Science  and  Engineering:  C,  70(1):772-776.
7. ElDirdiry O., Zaier R. and Al-Yahmedi A. 2017. Design of Biomechanical Legs with a Passive Toe Joint for Enhanced Human-like Walking. The Journal of Engineering Research, 14(2):166-181.
8. Ghodsi, M., Hosseinzadeh, N., Ozer A., Rajabzadeh, H., Varzeghani, N.G., Hojjat, Y., Talebian, S., Sheykholeslami, M. and Al-Yahmedi, A. 2017. Development of Gasoline Direct Injector using Giant Magnetostrictive Materials. IEEE Transactions on Industry Applications, 53(1):521-529.
9. Hoshyarmanesh, H., Rezvan谋 Dastgerdi, H., Ghodsi, M, Khandan R. and Zareinia, K. 2017. Numerical And Experimental Vibration Analysis of Olive Tree for Optimal Mechanized Harvesting Efficiency and Productivity, Computers and Electronics in Agriculture, 132:34–48.
10. Masoud, M.I., Saleem, A. and Al-Abri, R. 2018. Real-time Gating Signal Generation and Performance Analysis for Fully Controlled Five-phase, 10-pulse, Line-commutated Rectifier. IET Transaction on Power Electronics, 11(4):744-754.
11. Mohanan, N., Ahmad, A., Al-Busaidi, S., Khiriji, L., Abdulghani, A. and Al Nadabi, N. 2018. Use of Mathematical Morphology in Vehicle Plate Detection. Oriental Journal of Computer Science and Technology, 11(4):1-6.
12. Saleem, A., Soliman, H., Al-Ratrout, S. and Masoud, M.I. 2018. Robust Speed Control Design for Electric Motors Using the Kharitonov Theorem and Genetic Algorithms: An Experimental Study. International Journal of Modelling Identification and Control, 30(3):239-251.
13. Saleem, A., Soliman, H., Al-Ratrout, S. and Mesbah, M. 2018. Design of Fractional Order PID Controller with Application to Induction Motor Drive. Turkish Journal of Electrical Engineering and Computer Science, 26:2768-2778.
14. Shafiq, M., Laxman, K. and Dutta, J. 2018. Estimation of Ion Adsorption Using Iterative Analytical Model in Capacitive Deionization Process. Desalination and Water Treatment, 116:75-82
15. Shafiq, M., Saleem, A. and Mesbah, M. 2018. Model-Free Data Driven Control for Trajectory Tracking of an Amplified Piezoelectric Actuator. Sensors and Actuators A: Physical, 279:27-35.
16. Soliman, H.M., Saleem, A., Tutunji, T.A. and Al-Ratrout, S. 2018. Robust Pole-Placer for Electric Drives based on Uncertain Diophantine Equation and Interval Mathematics Using Hardware-in-the-Loop. Transactions of the Institute of Measurement and Control, 40(8):2546-2559.
17. Tutunji, T. and Saleem, A. 2018. Weighted Parametric Model Identification of Induction Motors with Variable Loads Using FNN Structure and NN2TF Algorithm. Transactions of the Institute of Measurement and Control, 40(5):1645-1658.

1. Abdo, J., Sharji, H. and Hassan, E. 2016. Improved Tribological Properties of Drilling Fluids at HTHP Conditions Using Nano-Sepiolite. Surface and Interface Analysis,48(7):522-526.
2. Al-Maashri, A., Pathuri, L., Awadalla, M., Ahmad, A. and Khaoua, M.O. 2016. Optimized Hardware Crypto Engines for XTEA and SHA-512 for Wireless Sensor Nodes. Indian Journal of Science and Technology, 9(29):1-7.
3. Al-Malki, N., Pourafshary, P., Al-Hadrami, H., Abdo, J. 2016. Controlling Bentonite-Based Drilling Mud Rheological Properties at HPHT Conditions Using Sepiolite Nanoparticles. Petroleum Exploration and Development, 43(4):717-723.
4. Al-Mezeini, N., Manickavasagan, A., Al-Yahyai, R., Al-Wahaibi, A., Al-Raeesi, A. and Khriji, L. 2016. X-ray Imaging of Stored Dates to Detect Infestation by Saw-Toothed Beetles. International Journal of Fruit Science, 16(1):42–56.
5. Benzaouia, A., Soliman, H. and Saleem, A. 2016. Regional Pole Placement with Saturated Control for DC-DC Buck Converter through Hardwar-In-the-Loop. Transactions of the Institute of Measurement and Control, 38:1041-1052.
6. Ghodsi, M., Hosseinzadeh, N., Ozer A., Rajabzadeh, H., Varzeghani, N.G., Hojjat, Y., Talebian, S., Sheykholeslami, M., Al-Yahmadi, A. 2016. Development of Gasoline Direct Injector using Giant Magnetostrictive Materials. IEEE Transactions on Industry Applications, 53(1):521-529.
7. Hamza, N., Khriji, L. and Tourki, R. 2016. Rejection of Common-Mode Voltages in ECG Signal by Removing the Ground Electrode. International Journal of Scientific and Engineering Research, 7(2):1480-1483.
8. Hoshyarmanesh, H., Ghodsi, M., Park, H. 2016. Electrical Properties of UV-Irradiated Thick Film Piezo-Sensors on Superalloy IN718 using Photochemical Metal Organic Deposition. Thin Solid Films, 616:673-679.
9. Mohanan, N., Ahmad, A., Abdulghani, A., Al Nadabi, M., Khriji, L. and Al Busaidi, S. 2016. A Brief Description of Pattern Recognition Techniques. Imperial Journal of Interdisciplinary Research, 2(8):717-722.
10. Saidani, T., Atri, M., Khriji, L. and Tourki, R. 2016. An Efficient Hardware Implementation of Parallel EBCOT Algorithm for JPEG2000. Journal of Real-Time Image Processing, 11(1):63–74.
11. Sheykholeslami, M., Hojjat, Y., Ghodsi, M., Zeighami, M., Kakavand, K. 2016. Effect of Magnetic Field on Mechanical Properties in Permandur. Materials Science and Engineering A, 651:598-603.
12. Sheykholeslami, M., Hojjat, Y., Simone, C., Ghodsi, M. 2016. An Approach to Design and Fabrication of Resonant Giant Magnetostrictive Transducer. Smart Structures and Systems, 17(2):313-325.

1.      Zaier, R. 2015. Rolling Optimization Method for Humanoid Robots. ag赌博 Journal for Science, 20:78-87.

2.      Tutunji, T. and Saleem, A. 2015. A Methodology for Identification and Control of Electro-Mechanical Actuators. MethodsX, 2:219-231.

3.      Saleem, A., Tahab, B., Tutunji, T. and Al-Qaisia, A. 2015. Identification and Cascade Control of Servo-Pneumatic System Using Particle Swarm Optimization. Simulation Modelling Practice and Theory, 52:164-179.

4.      Özer, A., Ghodsi, M., Sekiguchi, A., Saleem, A. and Al-Sabari, M. 2015. Design and Experimental Implementation of a Beam-Type Twin Dynamic Vibration Absorber for a Cantilevered Flexible Structure Carrying an Unbalanced Rotor: Numerical and Experimental Observations. Shock and Vibration, 501:154892.

5.      Mahjoub, S., Mnif, F. and Derbel, N. 2015. Second-Order Sliding Mode Approaches for the Control of a Class of Underactuated Systems. International Journal of Automation and Computing, 12:134-141.

6.      Karafi, M., Ghodsi, M. and Yousef Hojjat, Y. 2015. Development of Magnetostrictive Resonant Torsional Vibrator. IEEE Transactions on Magnetics, 51(9):4003608. 

7.      Ghodsi, M., Mirzamohamadi, S., Hojjat, Y., Talebian S., Hojjat, Y., Sheikhi, M., Al-Yahmadi, A. and Ozer, A. 2015. Analytical, Numerical and Experimental Investigation of a Giant Magnetostrictive (GM) Force Sensor.  Sensor Review, 35:357-365.

8.      Talebian, S., Hojjat, Y., Ghodsi, M., Karafi, M. and Mirzamohamadi, S. 2015. A Combined Preisach-Hyperbolic Tangent Model for Magnetic Hysteresis of Terfenol-D. Journal of Magnetism and Magnetic Materials, 396:38-47.

9.      Talebian, S., Hojjat, Y., Ghodsi, M. and Karafi, M. Study on Classical and Excess Eddy Currents Losses of Terfenol-D. Journal of Magnetism and Magnetic Materials, 388:150-159.

10.     Ghodsi, M. 2015. Optimization of Mover Acceleration in DC Tubular Linear Direct-Drive Machine Using Response Surface Method. International Review of Electrical Engineering, 10:492-500.

11.     Hoshyarmanesh, H., Nehzat, N., Salehi, M. and Ghodsi, M. 2015. X-Ray Diffraction Measurement of Residual Stress-Strain in Sol-Gel Grown Lead Zirconate Titanate Thick Films Deposited on Nickel-Based Supper Alloy Substrate. Journal of Mechanical science and Technology, 29:715-721.

12.     Abdo, J. and H. Sharji, H. 2015.  Investigation of Vibration Effects on Friction and Axial Force Transfer of Buckled Rod Constrained in a Horizontal Cylinder. Tribology International, 92:317-327.

13.     Abdo, J. 2015.  Material Sliding Wear Model Depending on Energy Dissipation. Mechanics of Advanced Materials and Structures, 22:1-7.

14.     Abdo, J., Al-Shabibi, A. and Sharji, H. 2015.  Effects of Tribological Properties of Water-Based Drilling Fluids on Buckling and Lock-up Length of Coiled Tubing in Drilling Operations. Tribology International, 82:493-501.

15.     Al-Mezeini, N., Manickavasagan, A., Al-Yahyai, R., Al-Wahaibi, A., Al-Raeesi, A. and Khriji, L. 2015. X-Ray Imaging of Stored Dates to Detect Infestation by Saw-toothed Beetles. International Journal of Fruit Science, 16:1-15.

1.   Alahakoon, P., Jayasuriya, H., Zekri, S., Al-Busaidi H. and Zaier, R. 2014. Comparative Study of ET Based and Soil Moisture Based Irrigation for Al Batinah Region in Oman. Acta Horticulturea Journal, 1054:135-144.

2.   Mahjoub, S., Mnif, F., Derbel, N. and Hamerlain, M. 2014. Radial-Basis Functions Neural Network Sliding Mode Control for Underactuated Manipulators. International Journal of Dynamics and Control, 2:533-541.

1.   Shuai, F., Al-Yahmadi, A. and ZengQi, S. 2013. Biped Walking on Level Ground with Torso Using Only One Actuator. Science China Information Sciences Journal, 56:1-9.

2.   YUAN, L., Al-Yahmedi, A. and Yuan, L. 2013. Virtual Coupling Control Method for Robotic Gait. Applied Mechanics and Materials, 278:629-632,

3.   YUAN, L., Al-Yahmedi, A. and Yuan, L. 2013. Optimized Passive Coupling Control for Biped Robot. TELKOMNIKA Indonesian Journal of Electrical Engineering, 11:3044-3052.

4.   Saleem, A., Salah, M., Ahmad, N. and Silberschmidt, V. 2013. Component Based Modeling of Piezoelectric Ultrasonic Actuators for Machining Applications. Journal of physics: Conference Series, 451:12036-12043.

1.   Al Yahmadi, A., Shuai, F. and Zengqi, S. 2012. Torso Swaying and Walking of a Biped Robot.  Int. J. Vehicle Noise and Vibration, 8:95-113.

2.   Pervez, T., Al-Hiddabi, S., AlYahmadi, A. and Seibi A. 2012. Dynamic Analysis and Vibration of Beam inside Annulus for Ultra Short-Radius Water Jet Drilling. The Journal of Engineering Research, 9:57-65.

3.   Zaier, R. and Abdo, J. 2012. Hard Disk Drive Manufacturing Optimization. Materials and Manufacturing Processes, 27:733-737.

4.   Zaier, R. and Abdo, J. 2012. Legged Vehicle Control and Vibration Reduction. The International Journal of Vehicle Noise and Vibration, 8:74-94.

5.   Abdo, J. and Zaier, R. 2012. A Novel Pin-on-Disk Machine for Stick-Slip Measurements. The Journal of Materials and Manufacturing Processes, 27:751-755.

1.   Khriji, L., Touati F., Benhmed, K. and Al-Yahmadi, A. 2011. Mobile Robot Navigation Based on Q-Learning Technique. International Journal of Advanced Robotic Systems, 8:45-51.

2.   Abouelsoud A., Abdo J. and Zaier R. 2011. Adaptive Velocity Controller of Rigid Body Motion Subject to Single State Elasto-plastic Friction Model. The Journal of Engineering Research, 8:66-73.

3.   Bahadur, I. and Mills, J. 2011. Overview of the Automation of Embryo Biopsy for Pre-implantation Genetic Diagnosis. International Journal of Mechatronics and Automation, 1:201-212.

4.   Abouelsoud, A., Abdo, J. and Zaier, R. 2011. Adaptive Velocity Controller of Rigid Body Motion Subject to Single State Elasto-Plastic Friction Model. The Journal of Engineering Research, 8:66-73.

5.   Saleem, A., Tutunji, T. and Al-Sharif, L. 2011. Mechatronic System Design Course for Undergraduate Programmes. European Journal of Engineering Education, 36: 341-356.